EQ-3 HomeMatic Technické informace Strana 38

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 53
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 37
74 75
> 3 Sec.
• The antenna symbol ( ) is displayed, along with
the teach-in time remaining in seconds. The teach-in
time is 30 seconds.
• Now put the device you wish to teach-in the radiator
thermostat into teach-in mode. Please follow the
relevant operating manual instructions of the corre-
sponding device.
• After teaching-in has been successful, „AC“ appears
and the display returns back to normal display.
The teach-in mode can be interrupted at any
time by pressing the Boost button (
) again
shortly.
If „nAC“ appears in the display, the teach-in pro-
cedure has not been successful. In this case,
please try again.
Ifyouhavealreadytaught-inandcongureda
HomeMatic Radiator Thermostat and want to
addanotherradiatorthermostatyoursthaveto
activate teach-in mode of the device you have
alreadycongured.Thecongurationdatawill
then be transmitted automatically to the new de-
vice.
Please repeat the teach-in procedure for all de-
vices that need to communicate with each other.
8.2 Teaching in to a HomeMatic CCU
Your device can be conveniently
• controlledandcongured,
• connected directly to other devices or
• used in central control programs
via the HomeMatic software „WebUI“. Therefore, your
radiator thermostat has to be taught-in to the Home-
MaticCentralControlUnitrst.Newdevicesare
taught-in to the Central Control Unit via the HomeMatic
„WebUI“.
A soon as a component has been taught-in to a
Central Control Unit, it can only be connected to
other components via the CCU.
Zobrazit stránku 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 52 53

Komentáře k této Příručce

Žádné komentáře